Category Archives: Mechanisms

Kinetic Shadows: Final Documentation

Kinetic Shadows: Peter Faces Hook from Nick Hubbard on Vimeo.

Peter Faces Hook was presented in both Piecing-it-Together and Mechanisms: If It Moves, It Breaks at the end of last semester.  Greta and I managed to created a compelling object that captivated my classmates as spectators at the same time as it sparked their desire to interact, to spin the wheel and see the illustrated shadows emerge for themselves.

To get to this stage, coming from the proposal outlined in my last post on the project, took a lot of work.  There were two tracks of tasks that needed to be completed: engineering the mechanism to make the sculpture move, and translating our initial prototypes of the sculpture into something cleaner and more durable.

Continue reading Kinetic Shadows: Final Documentation

Kinetic Shadows: Mechanisms Proposal

When the Captain’s Wheel of our kinetic shadow sculpture is turned, the fragments of the Pan images will rotate in an opposing direction.  I’m proposing to execute this mechanism based on a co-axial gear system (often utilized for helicopter rotors, among other things, in this case a clock).

 

Hand-drawn sketches of the system, with gear relationships and anticipated layout:

FullSizeRender

 

FullSizeRender (1) FullSizeRender (2)

Representations of the gear system in Adobe Illustrator (the gears were generated in Vectorworks software, then imported maintaining their ratios and positioning).

  • Wheel: 20″ D
  • Rod/Wire mounting plate: 6 3/4″ D
  • Gear spacing plates: 4.5″ D
  • Gear 1 ID: 3/16″  OD: 2″
  • Gear 2  ID: 3/16″ OD: 1″
  • Gears 3, 5 ID: 7/16″ OD: 2″
  • Gear 6  ID: 7/16″   OD: 1″
  • Gear 7 ID: 7/16″ OD:  1 1/2″
  • Central gear shaft (rotates mounting plate): 9 1/2″ L
  • Central gear tube (rotates wheel): 8″ L
  • Gear 3 shaft: 4″ L
  • Gear 5 shaft:  4″ L
  • Sculpture base: 10 1/4″ D x 2″ W

 

ITP_Laser_Template_75W

 

PT_Midterm_SystemSketch_Ver2_3-1-15

 

I laser-cut prototype gears in both wood and acrylic to test the system.

IMG_6641

I had intended to use the laser-cutter for the Captain’s Wheel, because I didn’t know how to use the CNC router(we will be using it in Piecing-it-Together after Spring Break), but David Rios, one of the ITP Residents, cautioned me against lasering thick plywood and simultaneously suggested that once CNC’d, I’d never go back.  So I commandeered a few of my classmates over the course of a few hours to show me how to load my Illustrator file into MasterCam, layout the paths for milling, and then operate the CNC.  The result:

IMG_6625 IMG_6618

Sketches & images of the design for the visual/shadow/perceptual element in previous posts here & here.

 

Kinetic Shadows: Prototyping the Imagery 2

IMG_6542Peter Pan, built of fragments from a silhouette design.

This past week we continued the design process for the visual-perceptual aspect of our kinetic shadow sculpture.  We started with full-form silhouette designs, breaking those into fragments to arrange and compose the images, as opposed to the start-from-random-pieces-of-paper method we tried in the beginning.  While there was something magical about composing a representation of Peter Pan on the fly, the result was rougher than we wanted, and I made it a goal to incorporate the laser-cutter into the fabrication of the piece on all levels (not just the mechanism).

We were confident that we could achieve the dual image, on dual axes, as anticipated in my last post.

IMG_6547Greta adding Captain Hook fragments perpendicular to, and amidst, the Peter Pan bits.

Continue reading Kinetic Shadows: Prototyping the Imagery 2

Kinetic Shadows: Design & Prototyping 1

 

IMG_6499Thus begins the homage to Kentridge.

Going over the concept for my Piecing-it-Together Midterm/Mechanisms Final, I outlined a shadow installation reminiscent of the work of William Kentridge.  I hinted that there was a potential collaboration, and the imagery would be drawn from Peter Pan.  I can confirm now that the collaboration is between my wife, Greta Wilson, and I.  Greta is a performer, founding member of the Satori Group, and also an illustrator/watercolorist.  A few years ago she started developing projects around an adaptation of Barrie’s original story Peter and Wendy.  We were slated to realize an installation for Storefronts Seattle (they never found us a matching location) that would involve storytelling through kinetic light sculptures.  When I started talking about my midterm ideas, we both had an aha! and agreed we could explore our previous concept seeds now.

Continue reading Kinetic Shadows: Design & Prototyping 1

Kinetic Shadows: Concept

FullSizeRender (4)Initial sketch for my kinetic shadow installation.

This semester I have two courses that overlap in a lot of their concepts: Piecing it Together and Mechanisms.  I have decided to combine assignments across both for one of my next projects.  While I initially thought of making some kind of shadow installation for my Physical Computing Final, I went in another direction.  I want to return to shadows now, and also try to pay homage to one of my biggest influences, William Kentridge.

Kentridge’s series “The Return”.

The basic proposal is to put a point light source on a track — or more likely some sort of simple-machine-driven rig — and have a user-control that directs the path of the light.  The sculpture will be composed of several laser-cut particles, reminiscent of Kentridge’s torn paper fragments.  When the light passes the particles at a certain angle, scenes from a story/world will be projected onto a screen.

FullSizeRender (3)

 

I’m speaking to a potential collaborator about using Peter Pan as source material.  She would provide illustrations that would be the basis for the sculpture .